Use A Gprs Connection - Nokia N900 User Manual

IP address
1 To obtain the IP address for the device automatically
from the server, select
2 If you want to enter the values manually, contact your
internet service provider for the correct values and for
further information.
DNS address
Domain name service (DNS) is an internet service that
translates domain names such as www.nokia.com into IP
addresses, such as 192.100.124.195.
1 To obtain the DNS address automatically from the server,
select Auto-retrieve
2 If you want to enter the values manually, enter the IP
addresses of the primary and secondary domain name
servers, if required by your internet service provider.
Other WLAN settings
Select the Other tab and define the following:
Wi-Fi transmission power — Select how much power the
device outputs during a WLAN connection. The default value
is 100 mW.
Power saving — Select the power saving level of WLAN
connections.
Ad hoc channel — Select a channel for ad hoc WLAN
connections.
To only support authentication according to the WPA2
protocol in WLAN connections, select
Auto-retrieve IP address.
DNS.
WPA2-only
The available options vary according to the selected
connection type.
Modify EAP settings
The EAP settings are only visible for WLAN connections that
use the EAP authentication protocol.
Enter user name manually
If the user name differs from the user name provided by the
certificate, select the
enter the user name in the
Require client authentication
If you want the EAP server to require your device to be
authenticated, select the
check box.

Use a GPRS connection

About GPRS
Your device supports packet data connections (network
service), such as GPRS in the GSM network. In 3G networks,
data connections remain active during voice calls.
To establish a data connection, an access point is required.
To check what access point types are required for particular
services, and for availability and subscription to GPRS
connection services, contact your network service provider.
Related topics
See "Packet data settings," p. 32.
•
mode.
Connect your device
Use manual user name
Manual user name
Require client authentication
31
check box, and
field.