Table of Contents
Advertisement
OPERATION
USING THE T 187 – SETUP MENU
SOURCE SETUP
There are three sub-menu items under Source Setup. These are Source
Setup (Normal View), Source Setup (Table View) and iPod Setup.
SOURCE SETUP (NORMAL VIEW)
The Source Setup (Normal View) menu makes it possible to set, allocate
or change the following settings.
SOURCE
The T 187 is equipped with ten configurable Sources. A particular Source
can be enabled or disabled, renamed, assigned analog and digital audio
sources, video sources, A/V Presets, Trigger settings among other settings.
These settings can be implemented through the following parameters.
NOTE
Source 5 is defaulted to iPod. Change the default setting of Source 5 to
iPod via the following procedure
Setup" menu, set "Enabled" to "No".
2 Then, go back to "Source Setup" menu and select "Source Setup (Normal
View).
Source 5 can now be configured to any desired settings.
ENABLED
One can enable/disable a Source via this option. This is particularly useful
if only few Sources are used and one directly selects the Source from the
front panel, bypassing unused sources.
Select "Yes" to enable the particular Source or "No" to disable the Source.
NAME
A new Name maybe assigned to a Source label. For example, if your BD
player is attached to "Source 1", it is possible to rename "Source 1" to "BD".
In order to rename the Source label, scroll to the "Name" parameter. Press
[
S
] to go to the first character. Then, press [
alphanumeric selections.
16
D
F
] to pick through the
/
Press [
S
] to move to the next character and at the same time save the
changes done on the current character. The name can be as long as twelve
characters.
The new Name will be shown in the VFD as well as on the OSD.
ANALOG AUDIO
The T 187 has nine analog audio inputs including 7.1 input. These analog
inputs - Audio 1 - 6, Audio Front, Audio MP and 7.1 Input can be variably
assigned to each Source.
Scroll to "Analog Audio", press [
S
] and then [
an analog audio input to the particular Source. There are three choices –
Audio, 7.1 Input or Off.
When "Audio" is chosen, press [
S
] and then [
desired audio input – 1 to 6, Front and MP.
Select "7.1 Input" to choose the audio signal fed to "7.1 Channel Input".
If "Off" is selected, no incoming analog audio signal is selected by the
particular Source. Note that when "Analog Audio" is set to "Off", "Gain" will
not be enabled as an option.
NOTE
An incoming digital signal present at the assigned digital input will always
take precedence over the assigned analog audio input, even if both are
present. To maintain the analog audio input for the particular Source, select
"Off" at the "Digital Audio" setting of the same "Source" menu.
GAIN
Gain adjustment allows all sources to play back at the same volume level so
you don't need to adjust the volume every time a new source is selected. It
is generally preferable to reduce the level of the loudest source rather than
making louder the softer sources.
Scroll to "Gain", press [
S
] and then [
D
/
from -12dB to 12dB.
Note that when "Analog Audio" is set to "Off", "Gain" will not be enabled as
an option.
D
F
] to select and assign
/
D
F
] to select and assign the
/
F
] to step through the desired level
Advertisement
Table of Contents
