Audio System - Acura 2007 RL Owner's Manual

Main Menu Table of Contents
Keyless Access System
Keyless Memory Settings
DRIVER'S ID
When you unlock the door with your
remote, each remote activates the
keyless memory settings related to
that remote. The driver's ID (Driver
1 or Driver 2) is shown on the back
of each remote.
170
TM Here are the settings activated with
the remote;
Driving position memory
(see page
Customized settings
(see page
Audio system settings
(see page
Climate control settings
(see page
RL model
Compass system preferences
(see page
Except RL model
Navigation system preferences
(see the navigation system
manual).
To turn off this feature, press and
hold the LOCK and UNLOCK
buttons at the same time. The LED
160 ).
81 ).
).
207
199 ).
240 ).
in the remote will blink once. Then
release the buttons. Doing this
cancels the keyless memory settings
for that remote and restores the
default settings.
Some of them keep the same
settings as they were set previously.
To turn the keyless memory settings
back on, repeat this procedure. The
LED will blink twice to indicate the
feature has been turned on.
Remote Transmitter Care
Avoid dropping or throwing the
transmitter.
Protect the transmitter from
extreme temperature.
Do not immerse the transmitter in
any liquid.
If you lose a transmitter, the
replacement needs to be
reprogrammed by your dealer.