Lenovo ThinkCentre M83 User Manual page 70

Machine types: 10a4, 10a5, 10aa, 10ab, 10df, 10dg, 10dh, 10dj, 10e8, 10e9, 10ea, and 10eb
Hide thumbs Also See for ThinkCentre M83:
Table of Contents

Advertisement

5. Remove the two screws that secure the hard disk drive assembly. Slide the hard disk drive assembly as
shown, and then lift the hard disk drive assembly to remove it from the chassis.
Figure 40. Removing the hard disk drive assembly
To install the hard disk drive assembly, do the following:
1. Position the hard disk drive assembly on the system board so that the two holes in the hard disk drive
bracket are aligned with the standoffs on the system board. Slide the hard disk drive assembly as shown
until the two screw holes
Figure 41. Installing the hard disk drive assembly
58
ThinkCentre M83 and M93/p User Guide
1
are aligned with the corresponding screw posts on the system board.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents