Cleaning And Care - Continental Electric CP42322 Instruction Manual

Platinum series
Table of Contents

Advertisement

Available languages

Available languages

3. Remove white pith (lower skin) from the citrus fruit, otherwise the juice
may taste bitter.
4. Cut the fruit or vegetables into pieces that fit into the chute without
forcing.
5. Ensure the juice extractor is fully and correctly assembled, plug cord
into outlet.
6. Switch on the unit at either high or low speed.
- High seed should be for hard and less juicy fruit such as carrot,
pineapple, apple, etc
- Low speed should be for soft and more juicy fruit such as melon,
grapefruit, peach, etc
7. Place food in food chute and press lightly with plunger. Never use
fingers or utensils other than the plunger as a food pusher. Food should be
placed in food chute only when unit is operating. Food can be continuously
placed in food chute without having to turn unit off.
8. When pulp bin is full, turn unit off. It is very important to empty the pulp
bin when full. For best performance, empty pulp bin and clean grating
sieve and separator often.
9. If the juice extractor seems to vibrate violently, slow down, or/and
produce less juice, switch it off and unplug. Thoroughly wash the grating
sieve and separator according to instructions. Reassemble and continue
juicing.
10. When juicing is completed, or when pulp bin or juice cup need to be
emptied, turn unit off and unplug from outlet. Immediately wash grating
sieve according to instructions.
11. Do not extract waterless fruit and vegetable as banana.
12.Max operation time: 1 minute, resting time: 1 minute.
1. To prolong the life of the juice extractor, it is recommended that all
washable parts be washed immediately after each use.
2. Turn OFF and unplug from electrical outlet.
3. Empty pulp bin and juice cup.
4. Unlock safety latches. Remove cover. Remove separator with grating
sieve immediately after using. Do not let food dry and harden on the
grating sieve. For hard to remove particles, use a plastic bristle brush or
toothbrush.
5. Wash plunger, cover, separator, pulp bin, and juice container in hot,
soapy water. Rinse, dry, and reassemble for storage.
6. DO NOT WASH the cutter/strainer in the dishwasher.
7. Some foods may stain plastic parts. Make a paste of baking soda and
water and rub on stained area with a damp cloth. Rinse and dry.
NOTE: Carrots will stain the unit permanently.
8. Wipe the outside of main base with a damp cloth. If necessary, you
may use a little mild detergent.
CLEANING & CARE

Advertisement

Table of Contents
loading

Table of Contents