Frequently Asked Questions (Faqs) - ActionTec ScreenBeam Pro SBWD100A EDU User Manual

I encounter connection failure with ScreenBeam Pro and my device can't
connect to it any more.
Reboot ScreenBeam Pro and try connection again. Or, reboot your device
s
(laptop/Ultrabook/tablet/smartphone) and try connection again.
Reboot both the ScreenBeam Pro and your device and try connection again.
s
If you are using a Windows 8.1 operating system, go to Change PC settings
s
> PC and Devices > Devices > Projectors, remove the profile of ScreenBeam
Pro from your device (PC/laptop/Ultrabook), and try connection again.
I can't connect to ScreenBeam Pro with ScreenBeam Configuration Utility
on my device. The Utility can't find ScreenBeam Pro.
ScreenBeam Pro Education Edition is not compatible with the ScreenBeam
Configuration Utility

Frequently Asked Questions (FAQs)

Can my device connect to ScreenBeam Pro?
To connect to ScreenBeam Pro, your device must be Intel WiDi compatible or
Wi-Fi Miracast-capable.
For a system to support Intel WiDi 3.5 (or later), it should have most if not all
Intel chipsets (Processor, Graphic Card, and Wireless chipset). Here are some
tips on the types of PC system that can support Intel WiDi.
If your system is an Ultrabook (4th Gen Intel Core processor), it's most like-
s
ly to support and have Intel WiDi 4.x preinstalled.
If your system is an Ultrabook (3rd Gen Intel Core processor or older),
s
it should have the required chipsets to support Intel WiDi. Update your
drivers and download the Intel WiDi software at: http://www.intel.com/go/
wirelessdisplayupdate.
Troubleshooting
38