Installing The Stand - Sharp LC-42LE756EN Operation Manual

Installing the Stand

Please read the following information carefully before attaching the stand to your new Sharp Television.
Installing the Stand
• Before fitting the stand, ensure that the TV is unplugged from its power source.
• Place the Sharp Television (1) on a soft, stable and flat surface, facing down.
• Place the Stand (3) on the stand mounting pattern on the rear side of the TV.
• Ensure the Stand (3) is placed correctly and that you can see the screw holes on the back of the Sharp
Television.
• Place the Stand Cover (2) on the Stand (3).
• Ensure the Stand Cover (3) is placed correctly and that you can see the screw holes on the back of the
Sharp Television.
• DO NOT insert the screws before placing the plastic molding.
• Insert the screws provided and tighten them gently until the stand is properly fitted.
IMPORTANT
English - 35 -