Changing The Security Code - GE 25983 User Manual

You should erase some of the messages in order for the system to record
incoming messages.
NOTE: The unit also answers after the 10th ring if it is turned off. To
access the answering system, enter your 3-digit security code after
you hear the beep.
Accessing the Answering System from Another
Location
You can access your answering system from any touch-tone phone by entering your
-digit security code after you hear the outgoing announcement.
1. Dial the phone number the answering system is connected to.
. After the answering system answers, enter the security code after you hear the tone.
. Follow the voice menu to use the answering system's remote functions.
The remote feature enables you to perform the following functions:
To
Repeat message
Play back messages
Stop message playback
Erase message
Skip message
Turn off/on answering system
Review voice menu options
The base shows REMOTE ACCESS ANSWERING CALL.
TIP: You can bypass the outgoing announcement by pressing any
numbered key on the touch-tone pad while the announcement
is playing. Then, you can enter your security code to access the
answering system.

Changing the Security Code

The default security code for accessing the answering system from another location
is 1 2 3.
The security code is set through the programming menu. Refer to "Telephone Set Up"
for more information.
Press this Button
1


0 (during message playback)

4
7
7