Sanyo C21LF37 Service Manual page 13

Service Adjustments
Service Adjustment-2 (MTS Adjustment)
Following table shows the initial values of MTS Adjustment which have been stored in the CPU ROM.
No. Item
01 INPUT LEVEL
02 HIGH SEPARATION
03 LOW SEPARATION
1. Enter the Service Menu
While pressing the MENU button on the televi-
sion, press the Number Key 3 on the remote control
unit. The Service Menu now appear.
INPUT LEVEL
HI SEPARATION
LOW SEPARATION
ADJUST: - /+
CHOOSE:
EXIT : MENU
[ MTS Adjustment Mode ]
2. Service Adjustments:
Press the Cursor /
button on the remote control handset to select the
desired service menu item you want to adjust.
Use the Cursor + / - or VOLUME + / - button to
adjust the data. The + or - button will increase or
decrease the data sequentially.
3. Exit from the Service Menu
Press the MENU button to turn off the Service Menu
display.
The data which is set in the service mode is stored
into the memory IC automatically.
Initial value
08
21
34
08
21
34
or CHANNEL UP/DOWN
Range
00~63
00~63
00~63
CH
MENU
MENU
[ Entering the Service Menu ]
Cursor -
[ Service Adjustment ]
[ Exit from the Service Menu ]
-13-
Cursor
Cursor +
Cursor