Panasonic SA-AKX95LMK Service Manual page 52

Step 4 Slightly lift up & remove the D-Amp Unit as arrow
shown.
Caution: During assembling, ensure that the D-Amp
Bracket is seated properly on the locator of Inner Chassis.
Step 5 Detach 17P FFC at the connector (CN5050) on the D-
Amp P.C.B..
Step 6 Remove 2 screws.
Step 7 Remove the D-Amp P.C.B..
Caution: Keep the D-Amp Brackets in safe place, place it
back during assembling.
52