How To Maintain Turbo Nozzle; How To Maintain Brush Roll - Eureka AS3020 series Owner's Manual

Turn nozzle onto
back side. Remove
1
1 screw.
C A U T I O N
Make sure vacuum is turned off and
power cord is unplugged.
How to clean brush roll
• Check brush roll periodically and
remove debris.
• Step on handle release to lower
handle (Fig. 1).
• Turn vacuum face down on floor.
• Use scissors to clip threads or hair
(Fig. 2).
Eureka Customer Service HELPLINE 1-800-282-2886

How to maintain turbo nozzle

Rotate lower part of
cover down over brush
2
and lift off cover.

How to maintain brush roll

1
2
Clear blockage from
brush roll area. Use
3
scissors to clip
threads or hair.
Place cover back
into position.
4
Tighten screw.
www.eureka.com
11