Advertisement
ANT. SWITCH IN
THIS POSITION.
LOOP
ANT
A. M. ANTENNA: Facilities are supplied on the MR-55 for the use of a low impedance loop antenna or
a high impedance long wire antenna. AM reception will generally be improved through the use of a properly
installed long wire outside antenna.
For locations where an outside antenna is impossible or impractical a 10 foot loop antenna is supplied. The
loop is attached between the terminals marked "HI" and "LO" on the "AM. ANT" terminal strip. The "AM.
ANT" terminating switch, located left of center next to the phono input jack on the back panel of the tuner,
must be in the loop position.
Orientation of the loop is critical. It should be mounted in as large a circle as practical in the vertical
plane.
10' LOOP ANTENNA
AM
ANT
PHONO
INPUT
OUTPUTS
—8—
MULTIPLEX
OUTPUT
Advertisement
