Flying Your Helicopter; Getting Started - EB Excalibur Sky Patroller User Manual

Remote control helicopter
Table of Contents

Advertisement

GETTING STARTED

Select the frequency band on the controller. The frequency on the
helicopter will automatically sync.
Switch the helicopter's ON/OFF switch to the ON position. The power
light will turn on.
Place the helicopter on the ground with the tail pointed toward you and
the nose facing away from you.
Make sure your surroundings are clear of obstacles before fl ying.
Do not fl y if the helicopter has become damaged in any way.
NEVER fl y the helicopter around another person or animal.
HOVER UP AND DOWN
When the helicopter is fl ying steadily,
you can slowly press the throttle stick
up to make the helicopter fl y higher,
or release the stick to make the
helicopter fl y lower. For smooth fl ying,
only make small movements.
TURNING CLOCKWISE
AND COUNTERCLOCKWISE
Keep the helicopter at a steady height.
Push the rudder stick on the right side
to the left to turn the helicopter
counterclockwise. Push the rudder stick
right to turn the helicopter clockwise.
FORWARD AND REVERSE
Push the right rudder stick up to make
the helicopter move forward. Push the
right rudder stick down to make the
helicopter move in reverse.
INTERFERENCE
Some radio frequencies or other R/C units nearby can cause interference and
poor performance. Try to move away from the source of the interference.
XC5380IS01EXC.indd 3
XC5380IS01EXC.indd 3

FLYING YOUR HELICOPTER

3
8/29/11 3:43 PM
8/29/11 3:43 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents