Front Panel Overview - Ramsey Electronics SG560 User Manual

INTRODUCTION
DATA
1
a
4
B
d
7
POWER
.

Front Panel Overview

Property of Ramsey Electronics, Inc.
A: The display area.
The first line: F: for frequency, shape as a two-character icon, and a letter to indicate last re-
called or saved memory.
Do not reproduce or distribute.
The second line: L: for level in volts peak to peak, O: For offset in volts DC.
B: The power switch.
C: The field selection buttons. Press [FREQ] to go to the frequency field, [LEVEL] to go to the
level field, [OFFSET] to go to the offset field, and [SHAPE] to select shape and return to the last
field selected.
D: Jog dial. Turning this will increment or decrement the currently selected field by the preset
step size. Set the step size before turning.
E: Outputs. These are standard-spaced banana jack outputs for test cables or probes, banana
to BNC adapters, or jumper wire sets.
DATA: This is the data entry keypad. The red portions of the buttons indicate what type of data
is entered during alternate selections. For example, when recalling memories, a-f are active
rather than 1-6. When selecting a shape, 7-9 represent SINE, SQUARE, and TRIANGLE.
Shift mode is activated when the [SHIFT] button is pressed and the SHIFT light is ON.
A
2 3
MHz
V
b c
5 6 kHz
mV
e f
8 9
Hz
0 RCL
SHIFT
STO
mute
SHIFT
C
FREQ
LEVEL
OFFSET
SHAP E
6
SG560 AUDIO GENERATOR
D
E
0-5MHZ
TRUE-DC
-
( )
+
( )