Advertisement
Revo 4
ADDR -
DMX Address Setting.
1. Tap the either the MENU, UP, or DOWN buttons until "ADDR"
is displayed, press ENTER.
2. "1" will now be displayed and flashing. Press the UP or
DOWN buttons to find your desired address. Press ENTER to
set your desired DMX address.
CHND -
This will let you switch between 4 Channel DMX
mode and 256 Channel DMX mode.
1. Tap the either the MENU button until "CHND" is displayed,
press ENTER. Either "4CH" or "256C" will be displayed
2. Tap the UP or DOWN buttons to choose your desired DMX
mode and press ENTER to confim and exit.
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Tap the either the MENU button until "SLND" is displayed,
press ENTER. "MAST", "SL 1" or "SL 2" will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim and exit.
SHND: SH 1 - SH 12
- Show modes 0 - 12 For Show Mode
to run properly make sure Sound Active Mode is off.
1. Tap the MENU button until "SHND" is displayed, press
ENTER.
2. "SH X" will now be displayed, "X" representing a number
between 1-12. Programs 1-12 are preset shows, while "SH 0"
is random mode. Press the UP or DOWN buttons to find your
desired show and press ENTER to confirm.
American DJ
- www.americandj.com - Revo 4 Instruction Manual Page 9
®
System Menu
Revo 4
3. Using the UP or DOWN buttons to find your desired speed
and press ENTER to confirm.
SOUN
mode
1. Tap the MENU button until "SOUN" is displayed, press
ENTER.
2. Either "ON" or "OFF" will now be displayed. Press the UP or
DOWN buttons to select one or the other.
BLND -
1. Tap the either the MENU button until "BLND" is displayed,
press ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until Yes is
displayed, press ENTER to confim and exit. The fixture will now
be in Blackout mode. To deactivate Blackout mode, select No
and press Enter.
LED -
2 minutes.
1. Tap the either the MENU button until "LED" is displayed,
press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to keep the LED display on at all
times, or "OFF" to allow the LED display to turn off after 2 min-
utes. Press any button to turn on the LED display again.
3. Press ENTER to confirm and exit.
DISP -
1. Tap the either the MENU button until "DISP" is displayed,
press ENTER.
- In this mode you can run the unit in sound active
Blackout or Stand by mode.
With this function the LED display will turn off after
This function will reverse the display 180º.
American DJ
- www.americandj.com - Revo 4 Instruction Manual Page 10
®
System Menu
Advertisement
