Pro-Form 985 User Manual page 10

9. Slide the two Handrail Caps (80) onto the lower
ends of the Left Handrail (77) and the Right
Handrail (78) as shown.
Attach the Handrails (77, 78) to the Uprights (81,
83) with four 5/16" x 2 1/2" Patch Bolts (5), four
5/16" Star Washers (11), and two #8 x 3/4"
Screws (1). Firmly tighten the four 5/16" x 2 1/2"
Patch Bolts.
Orient the Handrail Caps (80) as shown. Slide
the Handrail Caps against the Uprights (81, 83).
10. Have a second person hold the console assem-
bly near the Right Handrail (78). Connect the
Wire Harness (84) to the console wire. See the
inset drawing. The connectors should slide
together easily and snap into place. If they do
not, turn one connector and try again. IF THE
CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN YOU TURN ON THE POWER.
Next, remove the wire tie from the Wire Harness.
Insert the connectors and the excess wire into
the Right Handrail.
Set the console assembly on the Right Handrail
(78) and the Left Handrail (not shown). Be care-
ful not to pinch the wires.
9
5
11
77
80
1
10
Console
Assembly
Console
78
84
Wire Tie
10
5
11
81
78
80
1
Wire
Console
Wire
84
83