Call Functions; Make A Call; Number Dialing; Dialing Shortcuts - Nokia 6300b User Manual

C a l l f u n c t i o n s
4.

Call functions

Make a call

Number dialing

1. Enter the phone number, including the area code.
For international calls, press * twice for the international prefix (the + character replaces the international access code), enter
the country code, the area code without the leading 0, if necessary, and the phone number.
2. To call the number, press the call key. To adjust the volume in a call, press the volume key up or down.
3. To end the call or to cancel the call attempt, press the end key.
You can search for a name or phone number that you have saved in Contacts.
key to call the number.
To access the list of dialed numbers, press the call key once in the standby mode. To call the number, select a number or name,
and press the call key.

Dialing shortcuts

Assign a phone number to one of the number keys, 2 to 9.
Call the number in one of the following ways:
Press a number key, then the call key.
OR
If 1-touch dialing is set to On, press and hold a number key until the call begins.
Further details are described in

Enhanced voice dialing

You can make a phone call by saying the name that is saved in the contact list of the device.
Voice commands are language-dependent. Set the
Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely
upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection key or the volume down key. A short tone sounds, and
now is displayed.
2. Speak the name of the contact you want to dial clearly. If the voice recognition is successful, a list with matches is shown.
The device plays the voice command of the first match on the list. If it is not the correct command, scroll to another entry.
Using voice commands to carry out a selected device function is similar to voice dialing.

Answer or reject a call

To answer an incoming call, press the call key. To end the call, press the end key.
To reject an incoming call, press the end key. To mute the ringing tone, select Silence.
To answer a waiting call during an active call (network service), press the call key. The first call is put on hold. To end the active
call, press the end key. You may also activate the

Options during a call

Many of the options that you can use during a call are network services. For availability, contact your service provider.
During a call, select Options
Call options are Mute or Unmute, Contacts, Menu,
Network options are Answer
following:
Touch tones — to send tone strings
•
— to switch between the active call and the call on hold
Swap
•
Transfer calls — to connect a call on hold to an active call and disconnect yourself
•
Conference — to make a conference call
•
— to have a private discussion in a conference call
Private call
•
© 2007 Nokia. All rights reserved.
See "Call," p. 25.
1-touch dialing.
Recognition lang.
Call waiting
and from the following options:
Lock
or Decline, Hold or Unhold,
See "Search for a contact," p. 20.
See "Dialing shortcuts," p. 21.
before using voice dialing.
function. See "Call," p. 25.
keypad, Record, Voice clarity,
New call, Add to conference,
13
Press the call
See "Phone," p. 25.
See "Voice commands," p. 23.
Loudspeaker or Handset.
End call, End all calls, and the
Speak