Lens Shade; Exposure; Operating Your Camera - Samsung SID-47 User Manual

Operating Your Camera

LENS SHADE

LENS SHADE diminishes brightness contrast to obtain balanced view in the monitor.
MAIN SETUP
1.LENS SHADE

2.EXPOSURE

- OFF: LENS SHADE NOT IN USE
- ON: LENS SHADE IN USE
- EFL : You can choose Effective Focal length of lens.
(3mm, 3.7mm, 6mm, 8mm)
- Default setting value of EFL
· SID-47N/P : 3.7mm
· SID-48N/P : 8.0mm
· SID-49N/P : 3.7mm
- SHADE GAIN: Please adjust brightness gain on the
fringe of monitor.
Notes
• C hange EFL only when you change lenses.
• A pplicable lenses: F2.0, EFL=3.0mm, 3.7mm, 6mm, 8mm.
• The bigger SHADE GAIN can make the brighter fringe area but also the more image distortion and noise.
EXPOSURE
MAIN SETUP
1.LENS SHADE
2.EXPOSURE
3.WHITE BAL
1. When the SETUP menu screen is displayed, select
EXPOSURE by using the Function Setup switch so that
the arrow indicates 'EXPOSURE'.
2. Select a desired mode using the Function Setup switch.
16
COLOR DOME CAMERA
ON
ON
ATW
User's Manual
 SHUTTER : You can select either auto or manual shutter.
- A.FLK : Select this when you experience picture flicker, which can happen when
there is a clash with the frequency of the installed lighting.
- ESC : Select this to control the shutter speed automatically. If ESC is selected, the
shutter speed is automatically controlled depending on the ambient
illumination of the subject.
- MANUAL : You can control shutter speed manually.
 AGC (AUTO GAIN CONTROL) :
The higher the gain level, the brighter the screen - but the higher the noise.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 5.3dB to 32dB.
- HIGH : Allows automatic gain control from 5.3dB to 37dB.
 SENS-UP :
When it is night or dark, the camera automatically
detects the light level and maintains a clear picture if
this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
 RETURN :
Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.
Notes
• I f you press the Function Setup switch in 'AUTO' mode, You can adjust brightness by
adjusting the SENS-UP level. (x2 ~ x256)
• N ote that the higher the SENS-UP level, the brighter the screen, but the more likely
it is that an after-image will appear.
• A lthough Noise, Spots, and Whitish symptoms may occur in SENS-UP operation
when the sens-up level is increased, this is normal.
COLOR DOME CAMERA
17
User's Manual