Cruise Control; Changing Speed - Audi A5 Getting To Know Manual

Cruise Control

Activate
To activate, pull the control stalk
toward you.
Set Cruising Speed
At your desired speed, press the "SET" button
at the end of the stalk. The set speed and a
green cruise symbol are shown in the Driver
Information Display.

Changing Speed

There are three ways to change your
speed:
1. Accelerate or decelerate, then press
"SET" again.
2. To increase/decrease speed in 1 mph
increments, tap the stalk up or down.
3. Hold the stalk up or down to
increase/decrease speed in 5 mph
increments; release when desired
speed is reached.
Important Warnings and Safety Information, which you must read, are listed on the last panel under cruise control.
Cancel/Resume
To cancel and resume cruise control:
1. Press the brake pedal or push the stalk
slightly away from you.
2. The CRUISE light will go off.
3. To resume, pull the stalk towards you;
you will return to your set speed.
Your most recently set speed appears as a
small icon in the Driver Information Display.
It remains in memory until you turn your
Audi off.
Cruise Control