K ey to symbols
W ARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the oper ator's manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
•
Approved protective helmet
•
Approved hearing protection
•
Protective goggles or a visor
This product is in accordance with
applicable EC directives.
W ARNING! Dust forms when cutting, which
can cause injuries if inhaled. Use an
approved breathing mask. Always provide
for good ventilation.
W ARNING! Sparks from the cutting blade
can cause fire in combustible materials
such as: petrol (gas), wood, dry grass etc.
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in chapter Technical data and on
label.
Other symbols/decals on the mac hine refer to special
certification requirements for certain markets.
Inspection and/or maintenance should be
carried out with the motor switched off and
the plug disconnected.
Alw ays wear approved protective gloves.
Regular cleaning is required.
Visual chec k.
Protectiv e goggles or a visor must be worn.
2 –
English
KEY T O SYMBOLS