Main Unit - Panasonic Diga DMR-PWT500 Operating Instructions Manual

Main unit


1 Standby/on switch (Í/I) (
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a
small amount of power.
2 Disc tray ( 18)
3 Blue LED
≥It is possible to set the LED to turn on/off. (
4 Recording indicator
≥The indicater will light up while recording.
≥The indicator will blink while recording is paused.
5 CALL LED
≥The LED will light up when this unit receives incoming
call etc. of the video communication. (
6 Remote control signal sensor
– Angle: Approx. 20° up and down, 30° left and right
– Distance: Within approx. 7 m in front of the unit
7 Open/close disc tray (
8 USB port ( 18)
9 SD card slot ( 18)
: Channel select ( 24)
; Start recording ( 28)
< Stop
= Start play

18, 20)
80)
67)
18)

 
 Pull to flip down the
front panel.
> Display
HDDSD
BD
4 5
1 SD card slot indicator
2 Copying indicator (
3 Disc indicator
4 Drive (HDD, BD or SD) indicator
5 Remote control signal indicator
6 Main display section indicator
Current time/playback counter, various messages
7 Playback indicator
8 USB port indicator
9 Timer recording indicator
This indicator lights up when the timer recording
standby is activated.
Rear panel terminals (
   
   
1
SD USB
PLAY
6 7
47)
12–17)
2 3
COPY
8 9
11
VQT3C84