Advertisement
Metal Curved Back Assembly (16-24" Wide)
NOTE: Curved Back mounts only to back canes without a 10 degree bend.
NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out.
You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing
components. All service replacement Back Assemblies with Hardware shipped will be metal. New
Headrest Mounting Hardware is required when replacing an ABS Plastic Curved Back with a Metal Curved
Overall
Back Height
16"
17"
18"
19"
20"
21"
22"
23"
24"
25"
26"
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener
Adhesive on the Back Cover to attach properly.
Form No. 00-191
#3 Back Assembly with Hardware - 23"-24" Wide
Material
Back Height
ABS Plastic Curved
12"
13"
14"
15"
16"
17"
18"
19"
20"
21"
22"
To order call toll free 1-800-333-6900, or www.invacare.com
Back.
Material
Back Height
Metal Curved
11"
12"
13"
14"
15"
16"
17"
18"
19"
20"
21"
63
23" Wide
24" Wide
1146430
1146434
1146431
1146435
1146432
1146436
1144746
1144753
1144747
1144754
1144748
1144755
1144749
1144756
1144750
1144757
1144751
1144758
1144752
1144759
1160320
1160321
Advertisement
