Table of Contents
Advertisement
3.5.11
Aux Master
There are four sets of aux send controls for the channel pairs 1/2, 3/4, 5/6, and 7/8, each set
comprising a cut button and a gain control. There is also a global cut button.
3.5.12
Max Peak Limit
This switch enables and disables the max peak limiter on the mixer's DSD outputs.
3.5.13
Controlling the Channel Faders and Signal Processing
The appearance and behavior of the faders and signal processing blocks in the channel section is
affected by three controls in the center section.
3.5.13.1
Fader Mode
These three buttons determine whether the faders in the channel section control the program, the
AUX send trim, or the short channels (channels 9-16) – see § 3.6.9.
3.5.13.2
Channel Strip Reordering
The CHANNEL and COPY buttons are used to change the order of the audio processing on each
channel strip – see § 3.6.7.
3.5.13.3
Link
The buttons in this section are used to link faders and other controls into groups and to copy settings
between channels – see § 3.6.10.
Chapter 3: Sonoma Mixer
83
Hide quick links:
Advertisement
Table of Contents
