Self-Diagnosis Display/Warning Indicators - Sony HDR-CX560V Operating Manual

Disconnect the Built-in USB Cable from the

computer and your camcorder, and restart
the computer, then connect the computer and
your camcorder again in the correct order.
When both the Built-in USB Cable and the

USB jack of the camcorder are connected
to the external devices at the same time,
disconnect one that is not connected to a
computer.
Self-diagnosis display/
Warning indicators
If indicators appear on the LCD screen or
viewfinder (HDR-CX700/CX700V), check
the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility. In this case, when you
contact them, give them all the numbers of
the error code beginning with C or E.
C:(or E:) : (Self-diagnosis display)
C:04: 
The battery pack is not an "InfoLITHIUM"

battery pack (V series). Use an
"InfoLITHIUM" battery pack (V series)
(p. 114).
Connect the DC plug of the AC Adaptor to the

DC IN jack of your camcorder securely (p. 14).
C:06: 
The battery pack temperature is high. Change

the battery pack or place it in a cool place.
C:13:  / C:32: 
Remove the power source. Reconnect it and

operate your camcorder again.
E:  : 
Follow the steps from  on page 98.

 (Battery level warning)
The battery pack is nearly used up.

Depending on the operating environment or

battery conditions,  may flash, even if there
are about 20 minutes remaining.
(Warning indicator pertaining to
battery pack temperature)
The battery pack temperature is high. Change

the battery pack or place it in a cool place.
US
10