Installing The Cooker Hood - Zanussi ZHC 95 ALU Instruction Booklet

Cooker hood

Hide thumbs Also See for ZHC 95 ALU:

Instruction booklet (20 pages)

Instruction booklet (18 pages)

Table Of Contents

Table of Contents

Please ensure that when the appliance is installed

it is easily accessible to an engineer in the event

of a breakdown.

All installation must comply with the local

authorities requirements for the discharge

of exhaust air.

Incorrect installation may affect the safety

of this cooker hood.

Installation Requirements

Before installation, check that the

wall to which the cooker hood is to

be fitted for electricity cables and

water and gas pipes.

This cooker hood is designed to be fixed to any rigid

vertical surface over a cooking area, and can be used

in the extraction (ducted to the outside) or re-

circulation (internal recycling) mode.

The installation work must be carried out by a qualified

electrician or competent person.

The manufacturer declines any responsibility for

damages due to incorrect installation of the cooker

hood or if the cooker hood is not installed in

compliance with relevant regulations controlling this

type of installation.

Before unpacking the cooker hood position the carton

with the arrows pointing upwards as illustrated on the

carton.