System Requirements; Recording With A Dv Connection Cable (Vp-D903I/D903Di Only); Dv Vp-D903I/D903Di - Samsung VP-D903D Owner's Instruction Book

ENGLISH
IEEE 1394 Data Transfer
G System requirements
I
CPU : faster Intel ® Pentium III™ 450Mhz compatible.
I
Operating system : Windows
I
Main memory : more than 64 MB RAM
I
IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV connection cable
(VP-D903i/D903Di only)
1. Set the power switch to PLAYER mode.
2. Connect the DV cable (not supplied) from
the DV IN/OUT port of the camcorder to the
DV IN/OUT port of the other DV device.
I DV
Make sure that (DV IN) appears on
the screen.
3. Press the START/STOP button to begin REC PAUSE mode.
I
PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
I
If you want to pause recording momentarily, press
the START/STOP button again.
6. To stop recording, press the
Notes
I
When using this camcorder as a recorder, the pictures that appear on a
monitor may seem uneven, however recorded pictures will not be
affected.
I
Operation is not guaranteed for all computer environments recommended
above.
78 78
® 98SE, ME, XP, Mac OS (9.1~10.2)
(STOP) button.
IEEE 1394
G
I
CPU Intel ® Pentium III™ 450Mhz
I
Windows ® 98SE, ME, XP, Mac OS (9.1~10.2)
I
64 MB RAM
I
IEEE1394 IEEE 1394
1.
USB
DV
2.
3.
4.
5. START/STOP /
I
6.
I
I
DV
VP-D903i/D903Di
PLAYER
DV
DV / DV
DV /
I
DV
(DV IN)
START/STOP /
REC PAUSE
I
PAUSE OSD
DV
START/STOP /
STOP