Table of Contents
Advertisement
SPECIFICATIONS
Operating the Model 7.250 is a simple procedure. It is designed for long term stability in virtually
any home operating environment. However, if the unit is operated outside the parameters
outlined in this Owner's Manual, damage may result. Please read this manual carefully before
putting your new Model 7.250 power amplifier into operation.
The following section describes the Model 7.250 power amplifier's basic specifications. The
specifications are subject to change without notice or obligation.
................................................................................................................................................
Audio Input
................................................................................................................................................
Audio Output
................................................................................................................................................
Power Output
................................................................................................................................................
Frequency Response
................................................................................................................................................
THD
................................................................................................................................................
Signal-to-Noise Ratio
................................................................................................................................................
Crosstalk
................................................................................................................................................
Damping Factor
................................................................................................................................................
Slew Rate
................................................................................................................................................
Input Sensitivity
................................................................................................................................................
Input Impedance
................................................................................................................................................
Gain
................................................................................................................................................
Remote Trigger
................................................................................................................................................
Power Requirements
................................................................................................................................................
Dimensions
................................................................................................................................................
Weight
................................................................................................................................................
Rock Mounting
7 RCA, 7 XLR
7 pairs of heavy-duty, gold-plated binding posts
7 x 250w RMS @ 8 ohms
from 20Hz to 20KHz
20Hz - 20KHz +/- 0.1 dB
Less than 0.05% at rated output
Greater than 120dB below full rated power A-weighted.
Greater than -90dB from 20Hz to 20KHz
Greater than 270 from 10Hz to 400Hz
40V/mSec
1.25v rms Unbalanced
2.5v Balanced
Greater than 10K ohms Unbalanced
Greater than 20K ohms Balanced
28dB +/- 0.5dB
3-32v DC at 5mA or greater
117/234 Volts AC @ 50/60 Hz
8.7" H x 17.1"W x 19.60"D
105lbs.
Optional brackets are available for mounting the amplifier in a
standard 19 inch equipment rack.
7 x 400w RMS @ 4 ohms
from 20Hz to 20KHz
15
Advertisement
Table of Contents
