Table of Contents
Advertisement
Door reversal directions
1. Disconnect from the electricity supply.
2. Gently lay the fridge on its back with the top held
away from the floor by 5-8 cm (2-3 inches) of
packing;
3. Remove the bottom hinge (1) retaining screws
and remove the foot (2);
4. Slide out the fridge door from pin (G), unscrew
the latter and then refit it on the opposite side;
5. Unscrew the foot on the left side and refit it on the
opposite side;
6. Remove the two screws which mask the holes for
fixing the hinge from the left hand side;
7. Refit the door and the lower hinge (1) and the foot
(2);
8. Unscrew the handle. Refit it on the opposite side
after having pierced the plugs with a punch. Cover
the holes left open with the plugs supplied in the
documentation pack.
Important
After completion of the door reversing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdryer on a low setting.
14
2
PR228
1
G
Advertisement
Table of Contents
