Clarion VZ309 Owner's Manual & Installation Manual page 17

Dvd multimedia station with 3.5" lcd monitor
Table of Contents

Advertisement

DVD Video Player Operations
Watching/Listening to
a
Disc
1. Press the
[SRC]
to select DVD mode, when
disc is inserted.
AWARNING
• Some videos may be recorded at higher
than desired volume levels. Increase the
volume gradually from the minimal
setting after the video has started.
• Please note that watching and operating
the video while driving are prohibited
by law in some countries.
2. DVD icon will appear appear on the display
and TITLE appears. Press [ENT] or
[~/II]
to play.
Pausing Play
1. Press the
[~III]
to pause play.
2.
To resume play press same button again.
Ejecting a Disc
1.
Press the [OPEN] buUoo.to open the panel.
2.
Press the
[~]
button to eject the disc.
The play mode then switches to the Radio
mode.
*If the disc is left in the ejected position for
15 seconds, the disc is automatically
reloaded. In this case, the play mode will
remain set to the Radio mode.
Note:
If
you force a disc into before auto
reloading, it will damage a disc.
DVD Player Fast Forward/Fast Backward
While disc play, press [..... ] /
[~]
on the
panel or the [.... ] /
[~
] buttons on the remote
control to fast forward or fast reverse.
Press and hold once for 2X. Press and hold
additional times for 4X,
ax,
20X or PLAY.
- During the fast forward or backward operation,
press briefly to playback again.
- During the fast forward or backward operation,
the volume will be muted.
Repeat Chapter or Title
1.
Press [RPT] key once for chapter repeat,
Press the key again for chapter title.
2.
Press [RPT] key again to turn off the repeat
playback.
RepeatA ..... S
1. Select desired passage to repeat playback.
2. Press [A..... B] key to select the starting point.
Display shows REPEAT
A.
VZ309
Press [A ..... B] key again to select the ending
point.
Display shows REPEAT A B.
3. Selected passage starts to replay.
4.
Press [A ..... B] key again to exit.
Display shows A..... B CANCEL.
GOTO Desired Track or Chapter
1.
Press [GOTO] button on remote control.
2.
DVD track or DVD Title/Chapter and time
display on top of the screen. Current item is
highlighted. Use .... /
~
to select desired item.
Use digit button to select number. Press
ENTER to confirm.
Switching Among Languages
You can switch among the audio languages
during playback, if the disc has two or more
languages recorded. Depending on a disc, up to
a
audios can be recorded. For details, see the
mark on the disc.
0)) -
indicates
a
language
recorded.
1. Press [AUDIO] button on remote control or
[ T] on the tuner to switch among the
multiplile languages.
Select DVD Subtitle
1. Press [SUB.T] button on remote control to
to select subtitle language, if the DVD has
multiplile languages. Each time you touch the
button, you can switch subtitles.
Depending on the disc, up to 32 subtitles can
be recorded. See the mark on the disc.
Select DVD Title
1.
Press [TITLE] button, digit numbers or
use [.] [T] [ .... ]
[~]
buttons to select
title.
2.
Press [ENT] to play.
Select DVD Angle
1.
Press [ANGLE] button on remote control
to view from different angle, if DVD has
multiple-angle views.
Depending on the disc, up to 9 angles can be
recorded. See the multi-angle mark ~
on the disc.
ZOOM
1. Press [ZOOM] button on remote control
to zoom the picture.
X1 ..... X2 .....X3 ..... X4 ..... X1/4 ..... X1/2 ..... 0FF.
t
I
STOP
1. Press [.] button on remote control to stop
play.
17

Advertisement

Table of Contents
loading

Table of Contents