Kawai Concert Performer CP136 Owner's Manual page 85

L2 Selects the destination track. Use the
Dial to select the track number 1-16,
Tempo, or Chord.
L3 Selects the bar in the destination track
where the copied data will be placed.
Recording a Song
Copy
The Copy function allows you to copy a section or all of the data on a track to another location.
The destination may be on the same track, or it can be on another track.
• The destination of the copied data must either be:
1) A location that already has data in it.
2) The first blank bar after the end of a track (Bar 1 if the destination track is empty).
For example, if a track only has 10 bars in it, you cannot copy data onto bar 20. You can,
however, copy data to bars 1 through 11.
• Copied data replaces any current data that may be at the destination.
L 1
L 2
L 3
L 4
L 5
F 1 F 2 F 3 F 4
F1 Returns you to the Advanced Recorder menu.
F2 Undoes the copying. This option is not always
available.
F7 Proceed with copying.
R 1
Selects the track to be copied. Use the
R2
Dial to select the track numbers 1-16,
R 2
Tempo, or Chord.
R3 Selects the bar where the data that you
R 3
are copying starts. Use the Dial to
change the bar number.
R 4
R4 Selects the bar where the data that you
are copying ends. Use the Dial to change
R 5
the bar number.
F 5 F 6 F 7
77