Pioneer AVIC-F50BT Operation Manual page 59

Registering and connecting a Bluetooth device
5 Wait until your Bluetooth device ap-
pears in the list.
p If you cannot find the Bluetooth device that
you want to connect, check that the device
is waiting for the Bluetooth wireless tech-
nology connection.
6 Touch the Bluetooth device name you
want to register.
# If you touch [Search], the system starts
searching for Bluetooth devices waiting for con-
nection, and displays them in the list format
when any devices are detected.
7 Pair this navigation system with your
Bluetooth device.
When the Bluetooth device connects to this
product for the first time, a pairing operation
is needed to specify the device to connect.
How the pairing is performed varies depend-
ing on the Bluetooth device. Perform pairing
according to the screen instructions for this
product or Bluetooth device. Refer to the in-
struction manual of your devices to register
(registration and authentication of device).
After registering, a confirmation message ap-
pears.
8 Touch [OK].
The registration is complete, and the device is
connected as a hands-free phone.
You can perform the following setting depend-
ing on the Bluetooth device registered.
! Transferring the phone book
You can transfer the phone book to the navi-
gation system if the registered Bluetooth
device features PBAP (Phone Book Access
Profile).
If you touch [Yes], you can transfer the
whole phone book to the navigation system,
and then the message that transfer is fin-
ished appears.
! Selecting whether to use the Bluetooth
audio
You can select whether to use the
Bluetooth audio function if the registered
Bluetooth device features Bluetooth audio.
The message "Is this Android?" appears.
9 Touch [No].
The message "Is this device equipped with a
Digital AV Connector?" appears.
10 Touch [No].
The device is registered in the navigation sys-
tem. After the device is successfully regis-
tered, the Bluetooth connection is established
from the navigation system.
Chapter
09
59
Engb