Swing Assembly - Backyard Discovery 6411 Owner's Manual

Parts needed:
• (1) H7 - SWING SEAT SUPPORT - W101728
• (1) H11 - SWING SUPPORT - W101719
• (1) H12 - SWING SUPPORT - W101720
• (1) H16 - SWING SUPPORT - W101735
Phase Notes
• Assemble with hardware as shown.
Step 1: Pre-drill & attach 'H7' Swing
Seat Support to 'H11', 'H12' and 'H16'
Swing Supports using Screws 'BS', as
shown.
BS
Note: Do not overtighten screws, overtightening
may cause the screw to stick through the boards
and may cause sharp points. The head of the
screw should NOT sink into the wood for this
phase, it should be flush.

Swing Assembly

Phase 12
H16
H7
BS
Hardware needed:
• (6) BS - SCREW PFH 8x1-3/4 - H100089
To prevent board splitting, you
must pre-drill each board with
a 1/8" drill bit, before attaching.
H12
H11
BS