Quick Installation - ViewSonic ViewPanel VG191 User Manual

Quick Installation

1 Connect power cord and AC/DC
adapter
Connect the power cord and AC/DC adapter
from the ViewPanel to a properly grounded
AC outlet.
2 Connect video cable
Make sure both the ViewPanel
computer are turned OFF.
• Remove the lower back cover and lift up the
upper back cover.
• Connect the video cable to the computer then
to the ViewPanel. Both analog and digital
ports are available on the back of the
ViewPanel for your convenience.
Macintosh users: Models older than G3
require a Macintosh adapter. Attach the
adapter to the computer and plug the video
cable into the adapter.
To order a ViewSonic
contact ViewSonic Customer Support.
3 Turn ON ViewPanel and
computer
• Turn ON the ViewPanel, then turn ON the
computer. This sequence (ViewPanel
before computer) is important.
NOTE: Windows 95, 98 or 2000 users may
receive a message asking them to install the
INF file. This is on the CD.
4 Insert the ViewSonic Wizard CD
into the computer's CD drive.
(1) Insert the ViewSonic Wizard CD-ROM
into your computer's CD-ROM drive.
DC IN Port
AC/DC Adapter
with power cord
AC outlet
(wall socket)
4 ViewSonic
®
and
®
Macintosh adapter,
Analog Input Port
Video Cable
VG191/VG191b
If your computer does not have a CD-ROM
drive, see "Customer Support."
(2) Wait for the CD-ROM to auto-start.
NOTE: If the CD-ROM does not auto-start:
double-click on the CD-ROM icon in the
Windows Explorer, then double-click on
viewsonic.exe.
(3) Follow the on-screen instructions.
5 Windows users: Set the timing
mode (resolution and refresh
rate)
Example: 1280 X 1024 @ 60 Hz.
For instructions on changing the resolution
and refresh rate, see the graphic card's user
guide.
Installation is complete. Enjoy your new
ViewSonic ViewPanel.
To be best prepared for any future customer
service needs: print this user guide and write
the serial number in "For Your Records" on
page 2. (See back of ViewPanel.)
You can register your product online at the
website for your region. See the Customer
Support table in this guide.
The ViewSonic Wizard CD-ROM also
provides an opportunity for you to print the
registration form which you may mail or fax
to ViewSonic.
DVI Input