Front Of The Device - Philips DVDR 725H/05 Operating Instructions Manual

Front of the device

STANDBY-ON m
1
Switch device off / on.
2
Disc tray
Red light around the disc tray indicates recording on a DVD+RW,
DVD+R.
3 OPEN/CLOSE J
Open/close the disc tray.
4
GUIDE
Call up/Cancel the GUIDE Plus+
When the GUIDE Plus+ ® system is active, this button lights up
white.
5
OK
Confirm the entry/function.
6
Navigation buttons
UP , DOWN
Cursor buttons up, down in the menus.
Moves cursor up/down in the GUIDE Plus+
Previous or next title in the Time Shift Buffer during playback from
HDD.
LEFT , RIGHT
Cursor buttons left, right in the menus.
Previous or next position during playback of a title from the HDD
(media browser or Time Shift Buffer).
7
HDD
Call up the media browser (overview of recordings on the HDD).
During a recording on the HDD this button lights up blue.
8 N
Previous title/search backwards.
9 G Playback button
Play back a recorded disc or a title on the HDD.
® system
® system.
Introduction to the set
0 n Record button
Stores the current TV show on the HDD, mark recordings in the
Time Shift Buffer to be stored on HDD. Red light around this
button indicates:
•) a recording on a DVD+RW, DVD+R (archiving of titles)
•) storing of a recording(s) on the HDD.
h Stop button
A
Interrupt playback/recording.
B O
Next title/search forwards.
Behind the flap at the right hand corner on the front
C
S-VIDEO (CAM1) : Connector for SVHS/Hi8 camcorders or
SVHS/Hi8 video recorders (programme number 'CAM1')
D
Yellow socket
VIDEO (CAM1) : Video input socket: Connector for
camcorders or video recorders (programme number 'CAM1')
E
White/red socket
L AUDIO R (CAM1) : Audio input socket left/right :
Connector for camcorders or video recorders (programme
number 'CAM1')
F
DV IN (CAM2) : digital video input (DV format only), IEEE 1394,
FireWire for connecting a digital camcorder or other suitable
device (programme number 'CAM2').
Switching between the sockets VIDEO (CAM1)
C C
(CAM1) is done automatically. If a signal is available at both
sockets at the same time, the signal at the S-VIDEO
C C
(CAM1)
socket has priority.
If you change the socket (unplug), you must re-select the socket. (Button
CHANNEL r S and then CHANNEL q
D D
, S-VIDEO
P
)
8