Preparation For Use - Sylvania 6432TF Owner's Manual

PREPARATION FOR USE

CONNECTIONS
Cables used here are available on the market.
[ANTENNA CONNECTION]
VHF/UHF
OR
RF Cable
VHF
UHF
VHF/UHF
Combiner
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT AND FULLY INSERT.
MISE EN GARDE: POUR ÉVITER LES RISQUES D'ÉLECTROCUTION, INTRODUIRE
LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE
LA PRISE ET POUSSER JUSQU'AU FOND.
Note:
For your safety and to avoid damages to the unit, unplug the antenna cable from the
●
ANT. IN jack before moving the unit.
[EXTERNAL CONNECTION]
AUDIO OUTPUT
ex.
Audio Cable
(IN)
Home Audio System
COMPONENT INPUT
Component Video
Cable
ex.
(OUT)
/
DVD Player (OUT)
Component Audio
Cable
Note:
This TV can only accept a 480i (interlaced) video signal.
●
VIDEO1 INPUT (Rear)
S-Video Cable
ex.
(OUT)
(OUT)
Video Cassette Recorder
(OUT)
Notes:
The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for
●
connecting monaural audio equipment.
The S-VIDEO jack is given priority over the VIDEO jack on the rear panel.
●
VIDEO2 INPUT (Front)
ex.
Video Camera Video Game
Note:
The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for
●
connecting monaural audio equipment.
[CATV/SATELLITE CONNECTION]
*
CATV Box
or Satellite Box
OUT IN
75-ohm
Coaxial Cable
ANT. IN
OR
RF Cable
*
Some cable TV systems use scrambled signals and
require a special converter to receive these channels.
Consult your local cable company.
(OUT)
(IN)
(IN)
(IN)
OR
(IN)
Video Cable
(IN)
Audio Cable
Front of this TV
VIDEO
Video Cable
(OUT) (IN)
(OUT) (IN)
Audio Cable
SELECTING AUDIO/VIDEO INPUT
When you use the AUDIO/VIDEO input jacks or COMPONENT VIDEO INPUT jacks, select
"VIDEO1" or "VIDEO2" or "COMPONENT" mode by hitting [INPUT SELECT] on the
remote control. The input mode changes by hitting the button as following:
TV channel
INPUT
SELECT
• To use the VIDEO-1 INPUT jacks on the rear of the TV, select "VIDEO1".
• To use the jacks on the front of the TV, select "VIDEO2".
• To use the COMPONENT VIDEO INPUT jacks on the rear of the TV, select "COMPONENT".
From Cable
System
or Satellite
INSTALLING THE BATTERIES
Antenna
1
From Cable
System
[BATTERY PRECAUTIONS]
• Be sure to follow the correct polarity as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
• If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
OPERATIONS
REMOTE CONTROL AND FRONT PANEL FUNCTION
POWER button
Rear of this TV
To turn TV on/off
Channel number buttons
CH(ANNEL)
To select channels
To view on-screen menu
Rear of this TV
VOLUME
VIDEO L-AUDIO-R MENU CHANNEL POWER
Rear of this TV
Note:
If some digits appear in the corner of the screen when the unit is turned on at the first time, hit
●
[POWER] without unplugging the power cord.
SLEEP TIMER SETTING
1
1
SLEEP
L-AUDIO-R
2 2
SLEEP
repeatedly
The time increases by 10 minutes
up to 90.
VIDEO1 (Rear) VIDEO2 (Front)
2 3
POWER GAME SLEEP
DISPLAY
1 2 3
4 5 6
CHANNEL
RETURN
7 8 9
0 +100
INPUT
SELECT
K K / L L buttons
CH
VOL VOL
CH
MUTE
MENU
MENU button
MENU MENU VOLUME OLUME CHANNEL CHANNEL
VIDEO VIDEO L-AUDIO-R L-A UDIO-R
VOLUME X/Y buttons
To adjust volume
MENU button
To view on-screen menu
AUDIO L/R input jacks
VIDEO input jack
Notes:
When you disconnect the unit from the AC
●
outlet or when you have a power failure, the
sleep time will be lost.
To cancel the sleep timer, hit [SLEEP]
●
SLEEP 0
repeatedly until "SLEEP 0" is displayed.
The Sleep Timer Setting display will disap-
●
pear automatically after 10 seconds of the
operation.
SLEEP 10
COMPONENT
Install two AA batteries (supplied)
matching the polarity indicated inside
battery compartment of the remote con-
trol.
GAME button
SLEEP button
DISPLAY button
To display CH No./Audio Status
CHANNEL RETURN button
To return previous screen
INPUT SELECT button
To select TV or external input
MUTE button
VOL(UME) K K / L L buttons
To adjust volume
PO POWER WER
Infrared Sensor Window
POWER button
To turn TV on/off
CHANNEL K K /L L buttons
To select channels