Advertisement
Troubleshooting
Problem
The USB Hub
isn't working
properly.
"Power Surge
On Hub Port"
message
appears on com-
puter screen.
Specifications
USB Standard Compliances .........................1.0, 1.1or 2.0
Data Speed...............................................Low, 1.5 Mbps;
................................................................... Full, 12 Mbps;
................................................................ High, 480 Mbps
Operating Temperature ..............32° to 104°F (0° to 40°C)
Operating Humidity ....................................... 5% to 85%
............................................................. (Non-Condensing)
Weight .........................................................1.41 oz (40 g)
Specifications are subject to change and improvement without notice. Actual
product may vary from the images found in this document.
Cause
Your hub auto-
matically shuts
off any port with
a low or exces-
sive current.
The USB
powered device
is drawing more
power than the
hub can provide.
4
Solution
Disconnect and recon-
nect the affected
device.
If the port still doesn't
work, disconnect the
hub and the device,
and then reconnect
both.
Click on the message
box and follow the
instructions on screen
to re-enable the port.
Advertisement
