Specifications - Insignia NS-13CTV User Manual

Insignia NS-13CTV TV/DVD Combo
Problem
Poor or no sound
Remote control does not work
No television signal
Picture lacks color or picture is too
dark
All channels lose color intermittently
or there is snow
Poor reception or loss of color with
certain channels.
Picture wobbles or drifts
Solution
• Make sure that the
volume control is not
turned down.
• Make sure that the
mute is not turned
on.
• Check for local
interference.
• Make sure that the
antenna or CATV
connector is
connected correctly.
• The station or cable
provider may be
experiencing
problems. Try a
different channel.
• Make sure that you
are aiming the
remote control at the
remote control
receiver.
• Make sure that you
are within 16 feet of
your television.
• Make sure that
batteries are installed
correctly.
• Make sure that no
bright lights are
striking the receiver
window in your
television or remote
control.
• Make sure that no
obstacles are
between your
television and remote
control.
• Make sure that the
antenna is tightly
connected.
• Make sure that the
color, brightness,
and sharpness
controls are correctly
adjusted.
• Make sure that the
antenna is
connected.
• Make sure that the
antenna is not
broken.
• Make sure that
channels are
correctly tuned. You
may need to fine tune
these channels.
• The station or cable
provider may be
experiencing
problems. Try a
different channel.
• The cable channel
may be scrambled.
Contact you cable
provider for a cable
box.
• Check for local
interference.
www.insignia-products.com
Problem
No cable reception
No reception above channel 13
Television shuts off
Closed captioning is not working
Parental control is not working

Specifications

Design and specifications are subject to change
without notice. Dimensions quoted in this guide
are approximate.
Color system NTSC
Sound system M
Picture tube 13 inch (33 cm) color picture tube
Sound output 2x2 W (10% THD)
Power requirements AC 120 V 60 Hz
Power consumption 70 W
Dimensions 14.0 x 14.4 x 14.2 inches
(35.5 x 36.7 x 36.2 cm)
Accessories Remote control
User's guide
AA batteries
Solution
• Check all cable
connections.
• Set TV/CATV to
CATV.
• Contact your cable
provider regarding
possible service
interruption.
• Set TV/CATV to
CATV.
• Set the Sleep Timer
to 0.
• Clear the Off Timer.
• Make sure that the
antenna or CATV
connector is
connected correctly.
• The station or cable
provider may be
experiencing
problems. Try a
different channel.
• Press the CCD
button.
• Parental control does
not work with news
or sporting events.
• Make sure that the
ratings are set
correctly.
13