Motorola VC5090 Quick Reference Manual page 10

10
• Install the appropriate mounting hardware. The VC5090 ships with
four cap screws (3/8" - 16 - 2") for securing the mounting bracket. If
the supplied cap screws are not long enough, use 3/8" - 16 - X
stainless steel cap screws where X represents the length in inches of
the required cap screws.
• Connect the vehicle computer to the vehicle's wiring system.
Positioning the Vehicle Computer
• Position the vehicle computer to ensure proper ventilation around the
device.
• Determine the best position for the vehicle computer and all the
associated components. If a similar vehicle computer was previously
installed, check to see if the position it used is suitable for the
VC5090.
• Test the installation for at least 30 minutes before installing on another
vehicle:
-
Check that the position of the
vehicle computer does not
adversely obstruct vehicle
controls.
-
Check that the vehicle
computer does not adversely
obstruct the driver's view.
-
Check the position of the
vehicle computer for user
comfort over long periods.
-
Check positioning to avoid
extreme wrist angles that may
cause injury.
VC5090 Vehicle Computer