Selecting A Device From External Sources; Viewing Pictures From External Sources - Samsung LS32A33W Owner's Instructions Manual

Selecting a Device from External Sources

Viewing Pictures from External Sources

English-44
Your set enables you to choose which audio/video signals are output
to the external connector.
1
Press the MENU button.
Press the ENTER
Result: The options available in the Input group are displayed.
2
Press the ENTER
Result: The options available in the Source List menu are
displayed.
3
Select the required device by pressing the
Press the ENTER
4
Repeat Step 1.
Press the or button to select Edit Name.
Press the ENTER
Result: The options available in the Edit Name menu are
displayed.
5
Select the device that you wish to edit by pressing the
Result: The following options are available:
AV - S-Video - Component 1 - Component 2 -
HDMI - DVI - PC
6
Press the ENTER
7
Select the required device by pressing the
repeatedly.
Result: The following options are available:
---- - VCR - DVD - Cable STB - HD STB -
Satellite STB - AV Receiver - DVD Receiver -
Game - Camcorder - DVD Combo - DHR - PC
PC mode dose not support STB.
8
When you are satisfied with the setting, press the MENU button to
return to the previous menu or press the EXIT button to return to
normal viewing.
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1
Check that all the necessary connections have been made.
2
Press the SOURCE button.
Result: The edited device and audio status are displayed on
top-left of the set.
3
Press the SOURCE button until the required input source is
selected.
If you change the external source while viewing, pictures might
take a short period of time to be switched.
button to select Input.
button.
or
button.
button.
button.
or
button.
or button.
button