Connecting Tv + Dvd Combo + Dvd Receiver: Connecting Av Signal Cables - Samsung LT-P326W Owner's Instructions Manual

I
N S TA L L AT I O N
5. Connecting TV + DVD Combo + DVD Receiver:
Connecting AV Signal Cables
How to Connect the Cables (Connect in the order of numbers shown in the diagram.)
1. Antenna Cable: Connect the external antenna cable to the ANT IN port of the TV.
2. Anynet Connectors: To use Anynet, connect the Anynet port on the TV and the Anynet Input port
on the DVD/VCR Combo using the Stereo-Stereo Anynet connector.
3. Anynet Connectors: To use Anynet, connect the Anynet Output port on the DVD/VCR Combo and
the Anynet Input port on the DVD Receiver using the Stereo-Stereo Anynet connector.
4. AV Cable: If you do not have the component connector, connect the Output port of the AV output
jacks on the DVD/VCR Combo to the AV IN jacks on the TV.
5. Component Connector (Sold Separately): If you have the component connector, Connect the
Component Video Output jacks (DVD only) on the DVD/VCR Combo and the Component Input 1
"Y, P , P " jacks on the TV.
B R
6. Audio Cable: Connect the L-Audio-R COMPONENT Audio In 1 jacks on the TV to the Analog
Audio Output jacks on the DVD/VCR Combo.
7. Component Cable (Sold Separately): Connect Component Video Out jacks on the DVD Receiver
to the COMPONENT Input 2 "Y, P
8. Audio Cable:Connect the Left-Audio-Right port of Audio Output on the TV and the Audio Input
port on the DVD Receiver.
9. Optical Cable (Sold Separately): If you have an optical cable, connect the Digital Audio Output
Optical port on the DVD/VCR Combo to theDigital Input port on the DVD Receiver.
10.To enjoy 5.1-channel sound, go to "Set up" in the Anynet menu and select "Customized Setup".
, P " jacks on the TV.
B R
20
English-