Connecting An Aerial Or Cable Television Network; Connecting Component Devices (Dvd); Connecting External A/V Devices; Service - Samsung LE26R51BD Owner's Instructions Manual

Viewing the Connection Panel

Connecting an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
- A cable television network
- A satellite network

Connecting Component Devices (DVD)

- Connect component video cables to component connector ("P
the other ends to corresponding component video out connectors on the DVD.
- The Y, P and P connectors on your component devices or DVD are sometimes labeled Y, B-Y
B R
and R-Y or Y, Cb and Cr.
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DVD.

Connecting External A/V Devices

- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (
headphone is connected, the sound from the built-in speakers will be disabled.

SERVICE

- Connector for engineer.

Connecting Set-Top Box, VCR or DVD

- Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.
- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box
to the VCR (or DVD) and connect the VCR (or DVD) to your set.
Input/Output Specification
Connector
Video
SCART 1 (EXT 1)
SCART 2 (EXT 2)
English-6
Input
Audio (R/L) S-Video
", "P ", "Y") on the rear of your set and
R B
) on the rear of your set. While the
Output
RGB Video+Audio (R/L)
TV/DTV AV
Monitor Out
(TV/DTV AV/Ext. 1/Ext. 2/AV/S-VHS)