Using Flof To Select A Page; Storing Teletext Pages - Samsung LS20M22C Owner's Instructions Manual

03-BN68-00633J-00Eng.qxd

Using FLOF to Select a Page

The various topics included in the teletext pages are colour-coded, and
can be selected by pressing the coloured buttons on the remote control.
1 Display the teletext contents page by pressing the TTX/MIX button.
2 Press the coloured button corresponding to the topic that you wish
to select; the available topics are given on the status line.
Result: The page is displayed with other coloured information
that can be selected in the same way.
3 To display the previous or next page, press the corresponding
coloured button.
4 To display the subpage, see the following steps.
Press the (subpage) button.
Result: The available subpages appear.
Select the required subpage.
Subpages can be scrolled by using the

Storing Teletext Pages

You can store up to four teletext pages to display them later at leisure.
1 Select the LIST mode using the
Result: Four 3-digit numbers are displayed in different colours.
The (LIST/FLOF) button is used to switch between
the LIST and FLOF modes.
2 Press the coloured button corresponding to the page that will be
replaced.
3 Enter the new page number using the numeric buttons.
2
4 Repeat steps and
coloured button each time.
5 Press the (store) button until the corresponding blocks blink.
6/8/04 10:03 AM Page 35
or button.
(LIST/FLOF) button.
3
for each page to be stored, using a different
English-35