Rear Panel View - Insignia NS-LCD42 User Manual

# Feature Description
6 Video Input 1 Connect the composite video output from
jack an external video source to this jack.
7 Audio Inputs Connect the audio output (L/R) from an
(L/R) jacks external audio source to these jacks.
8 Headphone jack Plug a headphone connector into this jack
to listen to the TV on headphones.
Inserting a headphone connector mutes
the built-in TV speakers.

Rear panel view

1
2
10 9 8 7
# Connection Description
1 HDMI IN Connects to digital A/V equipment that
provide HDMI connectivity. HDMI
supports enhanced high-definition video
and two-channel digital audio on a single
cable.
2 PC/VGA IN Connects to your computer's video (VGA
port), and audio (L/R) output.
3 AC power plug Plug the AC power plug into a wall outlet.
and fuse If the TV will not turn on, check the fuse to
compartment determine whether it is blown. Replace if
necessary with a 4 A 250 Slowblow fuse
(5×20 mm).
Connect a 75 Ω antenna cable or Cable TV
4 VHF/UHF IN
cable to this connector.
5 Audio Out Digital optical audio out connects through
(digital optical a digital optical cable to a digital amplifier,
and digital for improved sound reproduction.
coaxial)
Digital coaxial audio out connects through
a digital coaxial cable to a digital amplifier,
for improved sound reproduction.
6 Audio Out Connects to an external amplifier or home
(stereo) theater system for improved sound
reproduction.
7 YPbPr1 and Connects to component video output
YPbPr2 (Y=green, Pb=blue, and Pr=red) and audio
(L=white and R=red) output of external
A/V equipment.
8 S-VIDEO IN Connects to the S-Video and audio
(L=white and R=red) output of external
A/V equipment.
9 VIDEO 2 IN Connects to the composite video (yellow)
and audio (L=white and R=red) output of
external A/V equipment.
10 AUDIO (L/R) Provides audio connections (L/R) for DVI
input (for DVI to input (which does not carry audio signals
HDMI only) on the DVI cable).
4
Remote control
3
6 5 4
#
1
2
3
4
5
6
7
8
9
10
11
12
www.insignia-products.com
Insignia NS-LCD42 42" LCD TV
25
24
23
22
21
20
19
18
17
16
15
14
13
12
Button Description
POWER Press to turn your TV on or put it into
Standby mode.
MTS/SAP Press to select a second audio channel
(if available).
PICTURE Press to display or select from the
various preset picture modes (Normal
(default) - Cinema - Sport - User -
Vivid)
ZOOM Press to display the current picture size.
Press repeatedly to cycle through the
available picture size options (Normal,
Full, Zoom, or Wide)
SLEEP Press to set the sleep timer, which turns
off your TV after a preset interval. Press
repeatedly to change the setting
(10 Min, 20 Min, 30 Min, 40 Min, 50
Min, 60 Min, 90 Min, 120 Min, or OFF).
MUTE Press to mute the sound. Press again to
restore the sound.
Press to select the next or previous
CH /CH
channel (from memorized channels list).
FAVORITE Press to access your favorite channel
list.
MENU Press to open the on-screen menu,
press again to close the on-screen
menu.
COLOR TEMP. Press to directly access color
temperature settings for your TV.
FREEZE Press to freeze the picture on your TV.
CLOCK Press to display the time on the screen.
1
2
3
4
5
6
7
8
9
10
11