Switching On And Off; Placing Your Television In Standby Mode - Samsung LS26A33W Owner's Instructions Manual

Switching On and Off

The mains lead is attached to the rear of your set.
1
Plug the mains lead into an appropriate socket.
Result: The main voltage is indicated on the rear of your set and
the frequency is 50 or 60Hz.
2
Press the POWER ( ) button on the right-side of your set.
Result: The standby indicator lights up on the front panel.
3
Press the numeric button (0~9) or channel up/down (
on the remote control or
the right-side of your set.
Result: The programme that you were watching last is reselected
automatically.
When you switch the set on for the very first time, you will be
asked to choose language in which the menus are to be
displayed (see page 14).
4
To switch your set off, press the POWER ( ) button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power
consumption. The standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1
Press the POWER ( ) button on the remote control.
Result: The screen is turned off and a red standby indicator
appears on the front of your set.
2
To switch your set back on, simply press the POWER ( ), numeric
buttons (0~9) or channel up/down (
Do not leave your set in standby mode for long periods of time (when you are
away on holiday, for example).
It is best to unplug the set from the mains and aerial.
C/P. button on
/ ) button again.
/ ) button
English-11