Accessories And Attachments - DeWalt D28476 Instruction Manual

643855-00,D28474,B3 10/3/06
NOTE: Never depress the spindle lock button
while the grinder is running. Never turn on the
grinder while the spindle lock button is
depressed. Damage to your tool may result.
SOFT MOUNT
The grinder is equipped with a soft mount,
enabling easy wheel installation and removal.
Accessories and
Attachments
It is important to choose the correct
guards, backing pads and flanges to use
with grinder accessories. See the chart
on pages 5-8 for information on choosing
the correct accessories.
CAUTION: Accessories must be rated for at least the speed
recommended on the tool warning label. Wheels and other acces-
sories running over rated speed can fly apart and cause injury.
ATTACHMENTS
Attachments designed specifically for this grinder can be pur-
chased through D WALT dealers and D
E
centers.
D284939 9" Type 27 guard
D284948 9" Type 28 guard
D284937 7" Type 27 guard
D284936 6" Type 11 Flaring cup guard with flange
D284934 4" Type 11 Flaring cup guard with flange
D284933 Type 11 flaring cup wheel backing flange
D284932 Type 1 Flange set
D284931 7" Type 1 Guard
11:38 AM Page 5
C
WALT Factory Service
E
Sanding Flap Discs
soft mount
type 27 guard
D284937/D284939
hubbed sanding flap
disc
NOTE: Wheel size must match guard size; i.e. a new 7" wheel may
not be used with a 9" guard. The bottom surface of wheel must be
inside the bend of the guard lip.
5
soft mount
type 27 guard
D284937/D284939
backing flange
54339-00
non-hubbed sanding
flap disc
clamp nut
22191-00