Table of Contents
Advertisement
2
Lightly press the shutter button down to the ¿ rst position. (Press halfway.)
• The AF con¿ rmation mark (() will be displayed, and a green frame (AF target) will
be displayed in the focus location.
• The ISO sensitivity, shutter speed and aperture value that have been set
automatically by the camera are displayed.
• If the AF con¿ rmation mark blinks, the subject is not in focus. (P. 136)
3
Press the shutter button again to take a picture. (Press all the way down.)
• The shutter sounds and the picture is taken.
• The shot image will be displayed on the monitor.
Pressing the shutter button halfway and all the way down
The shutter button has two positions. The act of lightly pressing the shutter button to the
¿ rst position and holding it there is called "pressing the shutter button halfway," that of
pressing it all the way down to the second position "pressing the shutter button all (or the
rest of) the way down."
#
Cautions
• You can change the view¿ nder display style. In this manual, [Style 1] is used.
• If the angle of the monitor has been changed, the view¿ nder will not light up automatically.
• If you press and hold down the u button, a menu is displayed that allows you to change
the settings for automatically lighting up the view¿ nder.
Press the shutter
button halfway.
AF con¿ rmation mark Shutter speed
Press the rest of
the way down
Press halfway
AF target
e
e
01:02:03
ISO-A
ISO-A
250 F5.6
1023
200
200
Aperture value
2
21
Advertisement
Table of Contents
