Connecting A Computer Using Hdmi Or Dvi; Turning On Your Tv For The First Time - Insignia 09-1082 User Manual

Connecting a computer using HDMI or DVI

Note
• If you are conncting a computer with an HDMI
jack, use an HDMI cable. An HDMI cable
transfers both video and audio. Separate audio
cables are not required.
• If you are connecting a computer with a DVI
jack, use an HDMI-to-DVI cable. An HDMI-to-DVI
cable transfers video only. Separate analog
audio cables are required.
To connect a computer using HDMI or DVI:
1 Make sure that your TV is turned off and the
power cord is disconnected.
2 Connect one end of an HDMI cable to to the
HDMI INPUT jack on the back of your TV, then
connect the other end of the cable to the HDMI
jack on the computer.
Or,
Connect one end of an HDMI-to-DVI cable to the
HDMI INPUT jack on the back of your TV, then
connect the other end of the cable to the DVI
jack on the computer.
Back of TV
Audio cable is only
required for a DVI
connection.
3 If you are connecting to a DVI jack on the
computer, connect an audio cable to the VGA
AUDIO INPUT jack on the back of your TV, then
connect the other end of the cable into the LINE
OUT jack on the computer.
4 Turn on your TV.
5 Press INPUT on the remote control or the side of
your TV to display the input source menu, then
press INPUT repeatedly or press
HDMI. Press OK/ENTER.
14
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV
Turning on your TV for the
first time
The first time you turn on your TV, the Setup Wizard
opens. The Setup Wizard guides you through
setting up basic settings including the menu
language, TV signal source, and the channel list.
To set up your TV:
1 Make sure that you have:
2 Press
3 Press
4 Press
or to select
www.insigniaproducts.com
• Installed the remote control batteries. For
more information, see "Installing remote
control batteries" on page 8.
• Connected the antenna, cable TV, or satellite
TV. For more information, see "Connecting an
antenna, cable TV, or satellite TV" on page 10.
• Connected the power cord. For more
information, see "Connecting the power cord"
on page 10.
POWER to turn on your TV. The Choose
your menu Language screen opens.
Choose your menu Language
English
Français
Español
or to highlight English, Français, or
Español, then press OK/ENTER. The Choose
your TV source screen opens.
Choose your TV source
Antenna
Cable
Cable/Satellite box
OK
Move Select
MENU
ENTER
Select Antenna if using an antenna for standard or HD TV.
or to highlight:
• Antenna—VHF and UHF channels.
• Cable—Cable TV channels (no cable box).
• Cable/Satellite box—Cable or satellite TV
tuner box. If you are using a box, you do not
need to scan for channels. If you select this
option, your TV will not scan for channels.
Next
0 Digital Channels
Analog Channels
0
Previous Exit
EXIT