Switching On Your Phone; Connecting To The Network - Sony CMD-J7 Operating Instructions Manual

01GB01COV-AE4.book Page 15 Wednesday, July 11, 2001 12:12 PM

Switching on Your Phone

To switch on/off your phone, press and hold
.
Entering PIN (Personal
Identification Number)
Enter your PIN using the
number keys (the PIN
appears in code as ****)
and press the Jog Dial (or
) to confirm.
If you do not enter a PIN
code, your phone will automatically switch
off after a few minutes. It is possible but not
recommended to disable the PIN code prompt
(see page 37).
Connecting to the
Network
After successfully entering your PIN code,
your phone searches for an available GSM
network. The network search is automatic and
may take a few seconds.
You are ready to make and
receive calls when the
network operator's name
and the signal strength
icon appears on the
display.
The following indicates the strength of the
received network signal. If the signal is very
weak, there is a risk of losing service.
Strong signal ↔ Weak signal ↔ Network not
available
15 GB