Electrolux Elara Service Manual page 12

PCB Display/Switch
Detach the pressostat hose
Remove the PCB with the
Detach the PCB supply cable reflector on it
Detach the reflector tab from the board
using a fine-tipped screwdriver
ATTENTION:
Boards and electronic devices could be
damaged by electrostatic discharges.
Don't touch any components without any
ESD protection.
Detach the reflector tab from the board
using a fine-tipped screwdriver
EN Publication number Rev. 01 02/2009 PR - 12/42
599 71 19-22