Download Print this page

King Canada 8208K Instruction Manual

4-1/2? angle disc grinder

Download this manual

Enlarged version

IMPORTANT INFORMATION

PROOF OF PURCHASE

4-1/2˝ ANGLE DISC GRINDER

Please keep your dated proof of purchase for warranty and servicing purposes.

LIMITED TOOL WARRANTY

KING CANADA makes every effort to ensure that this product meets high quality and

durability standards. KING CANADA warrants to the original retail consumer a 2-year

limited warranty as of the date the product was purchased at retail and that each product

is free from defects in materials. Warranty does not apply to defects due directly or

indirectly to misuse, abuse, negligence or accidents, repairs or alterations and lack of

maintenance. KING CANADA shall in no event be liable for death, injuries to persons or

property or for incidental, special or consequential damages arising from the use of our

products. To take advantage of this warranty, the product or part must be returned for

examination by the retailer. Shipping and handling charges may apply. If a defect is found,

KING CANADA will either repair or replace the product.

PARTS DIAGRAM & PARTS LISTS

Refer to the Parts section of the King Canada web site for the most updated parts diagram

and parts list.

INSTRUCTION MANUAL

MODEL: 8208K

Page 1 Shipping and handling charges may apply. If a defect is found, KING CANADA will either repair or replace the product. PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list. INSTRUCTION MANUAL MODEL: 8208K COPYRIGHT ©...
Page 2 OPERATION INSTRUCTIONS MAIN TECHNICAL SPECIFICATIONS 4. Replace the carbon brushes in time: Worn out brushes should be MODEL 8208K replaced (both brushes should be changed at the same time), or imperfect contact between the brushes and the commutator will 4-1/2”...
Page 3 ACCESSORIES & SAFETY INSTRUCTIONS OPERATION INSTRUCTIONS & MAINTENANCE ACCESSORIES 1. 2 grinding wheels (1/4” & 1/8”) Keep every disassembled part and replace parts with the 2. 5 sanding discs same ones: While disassembling the tool, care must be taken to 3.
Page 4: Safety Instructions
SAFETY INSTRUCTIONS TROUBLESHOOTING 7. Proper use of the plug: Do not change the plug and never insert naked wires directly into a socket. Faults Causes Solution 8. Proper use of the power cord: The power cord should not be lengthened or changed. The tool should not be carried by the 1.